I plant production (electricity, steam, heat oil heating) stainless steel reaction pot by the lid, barrel, jacket, stirrer, shaft seal transmission and support components, and the pot material at the contact of the pot and parts Are made of OCr18Ni9 or 1Cr18Ni9Ti stainless acid resistant steel plate.

Nominal capacity L	Electric power	Inner pot diameter φmm	Jacket diameter φmm	Reducer model	Motor n/kw	Stirring speed r.p.m
50	4×2 KW	φ400	φ600	BLD 0.8-1	1450/0.8	60-100
100	6×2 KW	φ500	φ700	BLD 1.1-1	1450/1.1	60-100
300	6×3 KW	φ800	φ1000	BLD 2.2-2	1450/2.2	60-100
500	9×3 KW	φ900	φ1100	BLD 3-2	1450/3	60-100
1000	12×4 KW	φ1200	φ1400	BLD 4-3	1450/4	60-100
2000	15×5 KW	φ1400	φ1600	BLD 4-3	1450/4	60-100
3000	15×6 KW	φ1600	φ1800	BLD 5.5-3	1450/5.5	60-100

      Stainless steel reactor

Nominal capacity L	Inner pot diameter φmm	Jacket diameter φmm	Motor kw	Reducer model	Stirring speed r.p.m
30	400	500	0.6	BLD 0.6-1	60-100
50	500	600	0.8	BLD 0.8-1	60-100
100	550	65	1.1	BLD 1.1-1	60-100
150	600	700	2.2	BLD 2.2-2	60-100
200	650	750	2.2	BLD 2.2-2	60-100
300	800	900	3	BLD 3-2	60-100
500	900	1000	3	BLD 3-2	60-100
800	1100	1200	4	BLD 4-2	60-100
1000	1200	1300	4	BLD 4-3	60-100
1500	1300	1400	4	BLD 4-3	60-100
2000	1400	1500	5.5	BLD 5.5-3	60-100
2500	1400	1500	7.5	BLD 7.5-3	60-100
3000	1400	1500	7.5	BLD 7.5-3	60-100
3500	1400	1500	7.5	BLD 7.5-4	60-100
4000	1500	1600	7.5	BLD 7.5-4	60-100
5000	1600	1700	7.5	BLD 11-4	60-100
6000	1800	1900	15	BLD 15-5	60-100
18000	2000	2100	15	BLD 15-5	60-100
32000	3000	3200	37	BLD 37-56A	35-59

      As the user due to the production process, operating conditions are not the same, jacket heating type is divided into heating rod heating, heat oil circulation heating, shaft seal device is divided into packing and mechanical seal, stirring type anchor, , Propulsion or frame. The number of openings, specifications or other requirements can be designed and produced according to user requirements.